A compact LTCC-based Ku-band transmitter module

Presents design, implementation, and measurement of a three-dimensional (3-D)-deployed RF front-end system-on-package (SOP) in a standard multi-layer low temperature co-fired ceramic (LTCC) technology. A compact 14 GHz GaAs MESFET-based transmitter module integrated with an embedded bandpass filter was built on LTCC 951AT tapes. The up-converter MMIC integrated with a voltage controlled oscillator (VCO) exhibits a measured up-conversion gain of 15 dB and an IIP3 of 15 dBm, while the power amplifier (PA) MMIC shows a measured gain of 31 dB and a 1-dB compression output power of 26 dBm at 14 GHz. Both MMICs were integrated on a compact LTCC module where an embedded front-end band pass filter (BPF) with a measured insertion loss of 3 dB at 14.25 GHz was integrated. The transmitter module is compact in size (400 /spl times/ 310 /spl times/ 35.2 mil/sup 3/), however it demonstrated an overall up-conversion gain of 41 dB, and available data rate of 32 Mbps with adjacent channel power ratio (ACPR) of 42 dB. These results suggest the feasibility of building highly SOP integrated RF front ends for microwave and millimeter wave applications.     

中国陶瓷业如何与国际市场对接——访中国建筑卫生陶瓷协会秘书长缪斌

我国是陶瓷生产大国,近几年发展速度很快.2001年,我国的建筑陶瓷产量约20亿平方米,卫生瓷5000万件以上,全年全行业出口额超过2亿美元,创历史最好水平.加入WTO给我国陶瓷行业带来了很多机遇和挑战,但我们究竟与意大利、西班牙等陶瓷强国差距在哪里呢?记者最近走访了中国建筑陶瓷协会秘书长缪斌先生.恰逢秘书长刚从欧洲考察回来,便聊起这次欧洲之行……     

Accumulation of thiobarbituric acid‐reactive substances in cured pork sausages treated with propolis extracts

Propolis collected by bees has many components that possess antifungal, anticancer and antioxidant properties. Cured ground pork meat was treated separately with 0.4% w/w ethanol‐extracted propolis (EEP 0.4%), 0.6% w/w water‐extracted propolis (WEP 0.6%), 0.8% w/w dried residue of ethanol‐extracted propolis (DREEP 0.8%) and 0.1% w/w potassium sorbate (PS 0.1%) and made into sausages. Thiobarbituric acid‐reactive substances (TBARS) were measured in the sausages to assess the effects of storage at 5, 10 and 20 °C after 0, 2 and 4 weeks. After 4 weeks of storage at 5 °C the sausages treated with EEP 0.4%, DREEP 0.8%, WEP 0.6% and PS 0.1% yielded TBARS values which were 50, 59, 35 and 91% respectively of the control value. There was an increase of 0.33 mg MDA kg^?1, the lowest of all treatments, in TBARS for the 0.4% w/w EEP‐treated sausages. The curing process will control microbiological spoilage, as will potassium sorbate. © 2002 Society of Chemical Industry     

Natural quality two-band LPC coding of speech at 880 bit/s withframe interpolation

A novel frame interpolation technique for two-band linear predictive coding (LPC) vocoders is proposed for maintaining natural speech quality at bit rates below 1 kbit/s. Experimental results show that the speech quality of the proposed vocoder is quite natural at bit rates 880 bit/s and comparable to that of 4.8 kbit/s CELP     

PCI接口芯片9080及其应用

CI9080是PLX公司开发的支持主从模式传输的PCI接口芯片。介绍了PCI总线的特性和PCI9080的主要特点、芯片内部结构,并详细分析了DMA,Direct Master,Direct Slave的传输特性和总线周期信号响应过程,以及PCI9080的总线工作模式、配置空间加载方式、上电初始化过程。最后给出了一个PCI数据采集卡的硬件设计框图和具体功能模块说明,旨在说明如何通过PCI9080设计PCI总线适配卡。     

Effects of solidification structure on fatigue crack initiation and fatigue strength in Al−Si−Mg cast alloys

Rotating-bending uniaxial fatigue tests and micro-fatigue crack initiation tests were carried out using a permanent mold cast (PMC) and semi-solid die cast (SDC) with Al−7%Si−0.35%Mg composition in order to examine the relationship between solidification structures and fatigue behaviors. The crack length was measured using a replication method. Fatigue strength was improved in SDC, which was almost consistent with the predicted fatigue strength using the size of Si particle cluster. Resistance to fatigue crack initiation and fatigue strength were improved in SDC owing to the finer Si cluster and to higher ultimate tensile strength. Fatigue crack in PMC was preferentially initiated at pores. For SDC, the fatigue crack was initiated at the Si particle/matrix interface, and then sucessively grew along eutectic cell boundaries.     

含葡萄糖基水溶性硫化黑的合成

本文以C.I.硫化黑1为原料,经葡萄糖还原成隐色体后,再与葡萄糖缩合,合成出含葡萄糖基水溶性硫化黑。合成方法分别采用了焙烘法和水介质中合成。结果表明,水介质中合成的含葡萄糖基水溶性硫化黑溶解度好于焙烘法。     

Automatic conversion from lexical words to prosodic words for mandarin text-to-speech system

In real speech, not like lexical words (LWs), prosodic words (PWs) are basic rhythmic units. The naturalness of a Text-to-Speech (TTS) system is directly influenced by the segmentation of the PWs. Most of the PWs are the combination of several LWs. In this paper, three Lexical Combination Models are proposed to combine LWs into PWs, including a Directed Acyclic Graph Model, a Segmentation Model and a Markov Model (MM). To cope with the situation where some long LWs should be segmented into two or more PWs, a Lexical Split Model (LSM) is applied to the long LWs. Experimental results prove that relatively constant results with various training data can be obtained from a MM. The Transformation-Based Error Driven Learning (TBED) algorithm, for its high performance of individual property, is applied in combination with the MM to improve the precision of PW segmentation. Experiments show that among the three proposed models, the MM combined with TBED and LSM, leads to the best performance, in which a precision of 93.00% and a recall of 93.23% are achieved. The perception test indicates that by using PWs as the lowest prosodic units a speech sounds more natural and acceptable than by using LWs. This paper is supported by NSFC Project (60503071); 973 Natural Basic Research Program of China (2004CB318102); Postdoctor Science Foundation of P. R. China (20070420275).     

Facile modifications of polyimide via chloromethylation: II. Synthesis and characterization of thermocurable transparent polyimide having methylene acrylate side groups

From chloromethylated polyimide, a useful starting material for modification of aromatic polyimides, a thermocurable transparent polyimide having acrylate side groups was prepared. In the presence of 1,8‐diazabicyclo[5,4,0]undec‐7‐ene, chloromethylated polyimide was esterified with acrylic acid to synthesize poly(imide methylene acrylate). The polymer was soluble in organic solvent, which makes it possible to prepare a planar film by spin coating. The polymer film became insoluble after thermal treatment at 230 °C for 30 min. Optical transparency of the film at 400 nm (for 1 µm thickness) was higher than 98 % and not affected by further heating at 230 °C for 250 min. Adhesion properties measured by the ASTM D3359‐B method ranged from 4B to 5B. Preliminary results of planarization testing showed a high degree of planarization (DOP) value (>0.53). These properties demonstrate that poly(imide methylene acrylate) could be utilized as a thermocurable transparent material in fabricating display devices such as TFT‐LCD. Copyright © 2004 Society of Chemical Industry